
How to Read a Sectional Chart: Student Guide
Read a sectional in a repeatable order: check dates, decode airport data, separate MSL and AGL, interpret airspace and verify current information.
Ellie Navarro · Nov 14, 2026 · 9 min readThe FirstSolo blog
Clear answers about the FAA private pilot written, checked against the FAA handbooks, the ACS and 14 CFR. Every guide lists its sources.


Read a sectional in a repeatable order: check dates, decode airport data, separate MSL and AGL, interpret airspace and verify current information.
Ellie Navarro · Nov 14, 2026 · 9 min read
Read and plot coordinates, compare north/east position, and convert decimal minutes to seconds or decimal degrees with a worked study grid.
Sam Whitaker · Nov 20, 2026 · 8 min read
Convert true, magnetic and compass headings with labeled examples, reverse checks and an aircraft compass-card reading exercise.
Ellie Navarro · Nov 18, 2026 · 8 min read
Use landmarks to check your estimates, then update the plan. A worked example connects checkpoint timing, groundspeed, ETA and fuel.
Sam Whitaker · Nov 17, 2026 · 8 min read
Learn the sectional symbols students confuse: airport colors, CTAF markers, RP and lighting notes, checkpoint flags, VFR waypoints and seaplane bases.
Sam Whitaker · Nov 16, 2026 · 9 min read
Separate a VOR radial from course and heading. Worked diagrams explain the OBS, CDI, TO/FROM, station passage and signal checks.
Ellie Navarro · Nov 16, 2026 · 9 min read
Work 10 original questions on time, fuel, wind correction, density altitude, CG and takeoff charts, then check each method in three answer groups.
Sam Whitaker · Nov 13, 2026 · 9 min read
Read chart conditions, separate ground roll from total distance, work a fictional two-input interpolation, and check landing and runway assumptions.
Ellie Navarro · Nov 12, 2026 · 8 min read
Work a 120-knot TAS example, set a conventional mechanical E6B, check left correction and groundspeed, and calculate cruise-segment time and fuel.
Sam Whitaker · Nov 11, 2026 · 8 min read
Work a fictional loading table, calculate 44.16 inches CG, handle moment/1,000 and recalculate after fuel burn before checking actual aircraft limits.
Ellie Navarro · Nov 10, 2026 · 7 min read
Separate elevation from pressure and density altitude, work an approximate 8,000-foot result, and check what it means for actual aircraft performance.
Sam Whitaker · Nov 8, 2026 · 7 min read
Connect POH/AFM chart inputs, density altitude, loading and runway conditions; compare distance definitions and work a fictional interpolation example.
Ellie Navarro · Nov 7, 2026 · 8 min readPut it into practice
Start with 50 free credits.